• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 22 subscribers
  • Views 365 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMX2594EVM: Programming Question

Trent Hobbs
Prodigy 10 points

Part Number: LMX2594EVM

Does the LMX2594EVM have to be connected to a PC for standard operation? Our desired use case is to program the evaluation module, disconnect it, and then deploy it. It can be reconnected and configured at a later time if anything requires updating. 

  • 0
    TI__Guru** 117230 points

    Hi Trent,

    In the hardware, the CE pin is being pulled-high by a on-board resistor. When power supply is applied to the board, the chip will be enabled.

    As a result, after programming, we can remove the ribbon cable and the chip will keep operation.