Hi Team,
Our customer would like to confirm if the USB2ANY-uWIRE interface board is included in the LMX25413030EVAL evaluation kit. I have checked the user's guide but it is not clear if it is included in the package.
Regards,
Danilo
Hi Noel,
Thank you for your response. I understand that the USB2ANY-uWIRE interface board is not an orderable EVM and is not sold separately as stated in this thread.
e2e.ti.com/.../lmk03806beval-usb2any-uwire-board
How would the customer connect the USB2ANY to LMX25413030EVAL evaluation kit? Figure 7 of the user's guide shows the connections of the USB2ANY and USB2ANY-uWIRE interface board to the LMX25413030EVAL evaluation kit.
Regards,
Danilo
Danilo,
We can consult the chart used to design the USB2ANY-uWIRE to confirm the connections:
I generated the simplified table below for jumper wiring:
| FUNCTION | EVM pin | USB2ANY pin |
| Readback | 1 | 3 |
| CLK | 2 | 8 |
| DATA | 4 | 4 |
| LE | 6 | 2 |
| EN_RFOUT | 7 | 7 |
| CE | 8 | 1 |
| GND | 9 | 6 |
Also see this image, which gives the orientation and labeling of the pins on the standard 10-pin keyed header:
Regards,
Derek Payne
