• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 21 subscribers
  • Views 244 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMX2595EVM: multi-burst mode and sync four LMX2595EVM

Jonathan Navor
Genius 9475 points
Part Number: LMX2595EVM
Other Parts Discussed in Thread: LMX2595

Hi Team,

Good day! I need your help and I am posting this in behalf of the customer.

Could you elaborate more on how to operate in multi-burst mode like sending one small burst of the signal and then another longer burst and then a short burst like a loop.

Please also help if I can sync 4 of your LMX2595EVM to run together in sync and what is the signal output V and A? 

Thank you in advance. 

Best regards,

Jonathan

 
  • 0
    TI__Guru** 107260 points

    Hi Jonathan,

    I don't understand what burst mode you are referring to, could you draw something to explain?

    If SYNC Cat. is 1, 2 or 3, you can sync multiple LMX2595 output phase together. 

    I don't understand what does "signal output V and A" mean.