LMX2820: LMX2820

Nima Javanbakht

Part Number: LMX2820

Hello,

Would you please provide me with the output power for different amplifier selection (#1 to #7) over the frequency band of 1-20GHz? (In the datasheet, the output power of state #0, 4, and 7 are presented in the form of a graph (Fig. 6-8).)

Thanks,

Nima

over 2 years ago

0 Ajeet Pal over 2 years ago

TI__Genius 12560 points

Hi Nima,

We have the characterization data for the output power at the corner and average OUTx_PWR settings (0, 4, 7) only. There is less variation on the output power between OUTx_PWR setting 4 and 7, whereas as below 4 the output power will reduced with more steps size.

Thanks!

Regards,

Ajeet Pal

0 Nima Javanbakht over 2 years ago in reply to Ajeet Pal

Prodigy 60 points

Hi Ajeet,

Understood, thank you for the information. However, it'd be great if you can provide the data in the form of a table as well.

Thanks,

Nima

0 Ajeet Pal over 2 years ago in reply to Nima Javanbakht

TI__Genius 12560 points

Hi Nima,

As mentioned the characterization done for OUTx_PWR settings (0, 4, 7) only. Will that sufficient for you in the table?

If you need for other settings, you can run the test on LMX2820EVM.

Thanks!

Regards,
Ajeet Pal

0 Nima Javanbakht over 2 years ago in reply to Ajeet Pal

Prodigy 60 points

Hi Ajeet,

Yes, it'd be sufficient for now.

Thanks & Regards,

Nima

Clock & timing

Clock & timing forum

LMX2820: LMX2820