Other Parts Discussed in Thread: LMX2594,
Hi,
Following information is provided in LMX2594 EVM user guide.
"There are different options to provide a reference oscillator to LMX2594. Use on-board oscillator, enable
LMK61xx from Reference Pro PCB, or use external oscillator. By default, the EVM is configured for an external
single-ended clock."
I am going to purchase this LMX2594 EVM. My question is:
Whether can I get factory enabled on-board oscillator on request as I don't want to connect any external reference clock. I don't have Reference Pro PCB also to enable on-board oscillator.
Kindly help in this regard and provide support in enabling the on-board oscillator.
Thanks
