LMX2594: MUXout pin layout

Kei Kuwahara

Part Number: LMX2594

Hello team,

Can I use the MUXout pin without pullup?

The customer has designed their board with MUXout pin pulled down as it is connected to the FPGA.

Best Regards,

Kei Kuwahara

+1 Noel Fung over 2 years ago

Hi Kuwahara-san,

MUXOUT is a push-pull output, it does not require external pull-up.

It is fine to have it pulled down, make sure the resistor is a few kΩ or above to limit the current flow.

0 Kei Kuwahara over 2 years ago in reply to Noel Fung

Hi Noel-san,

Thank you for the clear answer!

Best Regards,

Kei Kuwahara

Clock & timing forum