• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 20 subscribers
  • Views 103 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMK1D1204: Input Layout

Zack Schwarz
Prodigy 210 points
Part Number: LMK1D1204
Other Parts Discussed in Thread: LMK1D1208,

Hello,

Can you help share the preferred input layout of discretes/terminations to the LMK1D1205 device?

Thanks,
Zack

  • 0
    TI__Genius 9250 points

    Hi Zach, 

    I am assuming you are requesting for the LMK1D1204. It should be similar to to LMK1D1208.

    Below is a layout for how it was done on TI EVM. If you are just using DC coupled LVDS then I would say 100 ohm between the P and N is perfectly fine to avoid too many stubs on the transmission lines. 

    Layout

    Schematic Reference

    Let me know if you have any further questions.

    Best,

    Asim