• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 20 subscribers
  • Views 160 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

solution propose for special PWM control

Aki Li
Expert 8955 points
Other Parts Discussed in Thread: TLC555

Hi team, i have posted the below topic in logic forum, but i also need your insight regarding the below signal generation. Could we use some circuits together with TLC555 to achieve it? Thank you.

https://e2e.ti.com/support/logic-group/logic---internal/f/logic---internal-forum/1289516/solution-proposal-for-the-relay-control-circuits/4892111#4892111 

  • 0
    TI__Genius 10975 points

    Hello Aki,

    Our clocking parts generate square waves at specific frequency and once they turn on and start operating, those square waves/frequencies stay unless the output is turned off for that device. I believe it's best to continue talking to the logic team since our parts are made to output square waves set to a specific frequency, and not logic signals.

    Best,

    Andrea