Part Number: BQ32002
I am Mohamed Samsudeen from component engineering team.
Please provide few detail for MPN (BQ32002DR)
Specification mentioned below.
Please update. I have high priority of this work.
|
Frequency tolerance |
|
Oscillation start up time |
|
Power supply deduction voltage |
|
Current consumption |
|
Clock voltage |
Mohamed,
Please see below from the datasheet:
Frequency tolerance: –63-ppm to +126-ppm calibratable Adjustment, ±35 pre-calibration accuracy
Oscillation start up time: up to 1 second to update after the device switches from backup power supply to main power supply
Power supply deduction voltage: Not exactly certain what you are asking here. Vcc for this device is 3.3 V nominal, and has a ±0.3 V tolerance. The backup supply parameters are given by the table below:
\
Current consumption: 65 uA typical, 200 uA maximum.
Clock voltage: The IRQ pin can be configured as a 1 Hz or 512 Hz output. When this is the case, the output high voltage is Vcc.
Thanks,
Kadeem
