This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CDCM6208: Clock driver recommendation

Part Number: CDCM6208
Other Parts Discussed in Thread: CDCEL949, LMK1C1108

Tool/software:

Hi,

Please recommend a TI clock driver with the following requirements:

(1) Input channel number: 1, output channel number: 8;

(2) Operating frequency: 72MHz;

(3) Output voltage: 1.8V;

(4) Small package;

(5) The clock waveform requirements are as follows:

Thanks!

  • Hi Rhea,

    If you do not have an existing clock signal, I recommend the CDCEL949 clock generator.

    If you have an existing clock signal, I would recommend the LMK1C1108 buffer. 

    Do you have any jitter requirements?

    Best,
    Michael