• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 21 subscribers
  • Views 161 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMK04610: LMK04610 TICS Pro Frequency Planner SW Help

Jonathan Curran
Prodigy 20 points
Part Number: LMK04610

Tool/software:

Hi, I am trying to use the LMK04610 for the following setup in the Frequency Planner of the TICS Pro software:

I don't see any reason why this would not work.  Are there any limitations for the Frequency Planner that would prevent this from converging to a solution?

  • 0
    TI__Mastermind 31710 points

    The frequency planner is designed to find solutions that use PLL2 and the internal VCO. While there is a satisfactory distribution mode solution and perhaps with 320MHz VCXO a satisfactory PLL2 bypass (PLL1 only) solution, you would need to implement one of those solutions yourself.

    The VCO range is 5870MHz to 6175MHz. The only multiple of 320MHz that is in-range of the VCO is 6080MHz (320MHz * 19) - but 19 is a prime number, and is therefore indivisible by any factor available at the VCO post-divider. Consequently, there are no VCO-based solutions available.