• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 21 subscribers
  • Views 160 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMX2592: Current consumption at each pin level

Aathimoolam K
Prodigy 50 points
Part Number: LMX2592
Other Parts Discussed in Thread: LMX2820, LMX2582EVM

Tool/software:

Kindly provide current consumption details of LMX2592 at pin level as per part LMX2820 mentioned below image

  • 0
    TI__Guru* 98190 points

    Hi There,

    We can support, but will take some time to get the data. We will response by end of this week.

  • 0 in reply to Noel Fung
    TI__Guru* 98190 points

    Hi There,

    I don't have LMX2592 board, I could not measure the current with VCO doubler enabled. Below is the data using LMX2582EVM. Please note, RFoutB is using inductor pull-up while RFoutA uses resistor pull-up. Schematic is available in the EVM user's guide.

    Measurement was taken with below configuration.