This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
Dear
For the parts,CDCLVP1204RGTR, we found the DC on marking is 2340+(3A) while DC on labei is 2338+(39) and 2347+(3B); pls see the picture, they are mismatched.
is it normal?
The lot code is 3896635T43
Hello,
Let me look into this. Should only be a day or two.
Best regards,
Vicente
Hello,
The markings on the IC and the DC match.
Which are the 43rd week of year which is October.
Many times, testing or tape and reel are done much after assembly - 2DC could just indicate the week this was sealed or sent out.
Overall - this is not a cause for concer.
Best regards,
Vicente