Tool/software:
Hi Team,
I have register config .txt file for LMK05028 used in our board, would like to import reg file into TICSPro GUI to see the exact settings for LMK05028 and save into .tcs file. Kindly provide suggestions to import reg file and save as .tcs file.
Regards,
Balaji
Hi Balaji ,
To see the registers in TICS Pro, I suggest performing an R0 to Rn readback and save to a file in this exact format:
Then go to the LMK05028 TICS Pro profile and import the file.
Please note that non-register items that are visual GUI elements in the Main: Start Page may not import properly to match your desired configuration. Those GUI elements will need to be manually modified.
Regards,
Jennifer
Hi Balaji,
I can a change on my GUI. Please try clicking on Default Configurations --> EVM default in the toolbar menu then importing the hex file. You should see a change in the "Advanced" pages. I don't see the changes in the "Main:Start Page" because this page is user inputted not register-based.
This is how my Outputs page looks after loading the EVM default config then importing your hex.
Regards,
Jennifer
Hi Balaji,
It is currently not possible to know the reference input clock frequencies from a hex register file. The register file only contains the register settings for the input such as the divider or PLL settings but it does not contain the actual input frequency.
For the priority settings, those register values from the hex file can be viewed in the Main:Start Page. These settings come from the loaded file.
Regards,
Jennifer
