LMX1906-SP: question about register R33 values

Hi Hirano-san,

Let me check and get back.

Noel,

How is it going?

Best regards,

K.Hirano

Hi Hirano,

I don't think R33 is required to program at all, but I am still waiting for the designer to confirm. 

Noel,

The datasheet says "Program this field to 0x6666. Note that this is different than the reset value."
So it sounds R33 is required to program.
Please confirm with the designer which is correct, 5666h or 6666h.

Best regards,

K.Hirano

Hi Hirano-san,

I already tried this in the lab, programming this register or not does not make any difference, that's why I think this register does not need programming.

I am still waiting for the designer to confirm. 

Noel,

I see, thank you for your trial in the lab.
I look forward to hear feedback from the designer.

Best regards,

K.Hirano

Noel,

I'm sorry for the rush, but I received a reminder from my customer, could you get some immediate comments from designers, please? 

Best regards,

K.Hirano