• State
  • Locked Locked
  • Replies 0 replies
  • Subscribers 20 subscribers
  • Views 326 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

The problem of LMX2531 output power

junjie fang
Prodigy 10 points
Other Parts Discussed in Thread: LMX2531

I am facing a problem that when debug the PLL chip LMX2531,the output signal power is only -10 dBm.but according to the datasheet of LMX 2531,the normal output power is 0 to 5 dBm (enable the VCO output divider). the output frequency is ok and the chip can lock. who can tell me what i should do? thanks a lot.