LMX2615EVM-CVAL: Hyperlynx Project

Joseph Sanchez

Part Number: LMX2615EVM-CVAL
Other Parts Discussed in Thread: LMX2615-SP

Tool/software:

We're making efforts to characterize the output using this EVAL board and would like a Hyperlynx Model of the EVAL board to help with correlating the Vpp outputs. Can you share a Hyperlynx BoardSim file if one is available?

10 months ago

0 Noel Fung 10 months ago

TI__Guru** 115310 points

Hi Joseph,

we only have the IBIS model, we don't have the Hyperlynx file.

0 Joseph Sanchez 10 months ago in reply to Noel Fung

Intellectual 370 points

Any chance someone can create one for me? I do realize we're not supposed to use the LMX2615-SP IBIS for SI simulations but we think we can use it to correlate a power output level then use it in a test sim to give us an idea of the signal as it gets to our receivers.

0 Noel Fung 10 months ago in reply to Joseph Sanchez

TI__Guru** 115310 points

Hi Joseph,

Unfortunately, except for the IBIS model, we don't have any other sim model.

0 Joseph Sanchez 10 months ago in reply to Noel Fung

Intellectual 370 points

I'm guessing you can't share the design database? Just need to extract a Hyperlynx file.

Clock & timing

Clock & timing forum

LMX2615EVM-CVAL: Hyperlynx Project