LMK1D2102L: single end input

Hi team,

For 1.65V, my customer will make it from 3.3V by using voltage divider. In the electrical spec, it is said that IIH=50uA and IIL is 30uA for single end input. Since 3.3V/50uA=66kΩ, should the customer use a resistor that is less than 1/10 like 5.6kΩ for the voltage divider? Please let us know if there is a limitation or recommended values for the voltage divider for creating the VTH for single end input.

Regards
Ohashi

Hi Vicente,

Any update on this?

Regards
Ohashi

Hi team,

Please give us comment on this inquiry.

Regards
Ohashi

Hi Vicente

vicente flores prado said:

You can also follow the EVM user's guide for reference on single ended input config. 

I cannot find the EVM for I cannot find the EVM for LMK1D2102L. Could you provide as the snapshot for the single end input example design? Or let me know what value is typically used for single end input device.

Regards
Ohashi