LMK04832: OSCIN to OSCOUT

Sarathi P

Part Number: LMK04832

Dear Team,

I'm using a single-ended input signal at the OSCIN pin, but it's still possible to generate a differential output signal at the OSCOUT port.

11 months ago

0 Derek Payne 11 months ago

TI__Mastermind 35500 points

The choice of single-ended or differential format for OSCout is entirely determined by the OSCout_FMT field. It does not matter whether OSCin (or the source for the FB_MUX, if the FB_MUX is used as the OSCout source) is single-ended or differential.

0 Sarathi P 11 months ago in reply to Derek Payne

Prodigy 120 points

Dear Payne,

Thanks for your reply.

I have one more doubt — what is the load capacitance of the LVDS and LVPECL output formats of the CLKOUT pins? My receiver expects an input capacitance of typically 4 pF

0 Michael Srinivasan 11 months ago in reply to Sarathi P

TI__Mastermind 19771 points

Hi Sarathi,

We do not specify an output load capacitance for the CLKout pins.

Thanks,

Michael

Clock & timing

Clock & timing forum

LMK04832: OSCIN to OSCOUT