CDCEL913 jitter

NAOKI AOYAMA

Guru 11215 points

Other Parts Discussed in Thread: CDCEL913

Hello,

My customer uses the CDCEL913.

He consider a jitter value.

Is a jitter value on the datasheet tested without ssc function?

How about a jitter value under ssc function is on?

Regards,

Naoki Aoyama

0 Arvind Sridhar over 11 years ago

Hi Aoyama-san,

Could you give us the customer configuraiton details? We do not have the SSC enabled Cycle-Cycle data handy for these parts.

Regards

Arvind Sridhar

0 NAOKI AOYAMA over 11 years ago in reply to Arvind Sridhar

Guru 11215 points

Hi Arvind,

Thank you for your fast reply.

My customer wants to know the test conditions of jitter parameter.

Dose the SSC function operate in jitter test?

Regards

Naoki Aoyama

0 Arvind Sridhar over 11 years ago in reply to NAOKI AOYAMA

Hi Aoyama-san,

SSC was disabled for the jitter test.

Regards

Arvind Sridhar

0 NAOKI AOYAMA over 11 years ago in reply to Arvind Sridhar

Guru 11215 points

Hi Arvind,

Thank you for your very fast reply.

I will feedback to my customer that information.

Thanks

Naoki Aoyama

Clock & timing forum