Bug of Clock Design Tool

ws key

Prodigy 60 points

I'v found a bug using Clock tree design tool.

The tool doesn't display a decimal point number properly.

For example. when the real target is 101.11KHz.

The tool displays only 01.11 kHz. the first "1" is disappreaed and shows the second and thid digit.

over 11 years ago

0 Arvind Sridhar over 11 years ago

TI__Mastermind 24205 points

Hi Key,

Thanks for pointing this out. We will look into this bug and get back to you soon.

Regards

Arvind Sridhar

0 Timothy T over 11 years ago

TI__Mastermind 28590 points

Can you confirm where you see this bug/how to reproduce?

I noticed that if in Windows 7 I adjusted my font size to 125% from 100% at Control Panel\Appearance and Personalization\Display, then in the Bode Plot the loop bandwidth would be cut off.

Is Bode Plot window where you are seeing the issue?
Does setting font size to 100% solve your issue?

73,

Timothy

0 ws key over 11 years ago in reply to Timothy T

Prodigy 60 points

Thank you.

I have solved the issue by following your guide.

Clock & timing

Clock & timing forum

Bug of Clock Design Tool