CDCE913 application for audio clock

KANJI SHIBATANI

Other Parts Discussed in Thread: CDCE913, CD74HC4046A, SN74LV4046A

Hello

I want to suggest cutomer to use CDCE913 in order to get x512 fs from 1fs.

Below is the application note of TI.

However, CD74HC4046A in this App note is NOT available.

I suppose to recommend SN74LV4046A instead.

Would you please advise?

Best Regards

0 Arvind Sridhar over 12 years ago

Hi Shibatani-San,

Regards

Arvind Sridhar

0 KANJI SHIBATANI over 12 years ago in reply to Arvind Sridhar

Hello

Thank you for your quick answer.

This part is NOT available from TI-Japan site.

Please let me know again.

The VDD ( VCCpin #16 of 74HC4046A ) on scaa088.pdf page 5 is 3.3V ?

I think VDD in scaa088.pdf schematic Page5 is 3.3V,

because VDD is used/ connected to CDCE913 I/O(VDDOUT) also.

Would you please advise?

Best Regards

0 Arvind Sridhar over 12 years ago in reply to KANJI SHIBATANI

Hi Shibatani San,

Yes. The VDD (VCCpin #16 of 74HC4046A) on scaa088.pdf page 5 is 3.3V

Regards

Arvind Sridhar

0 KANJI SHIBATANI over 12 years ago in reply to Arvind Sridhar

Hello

Thank you very much for your quick response!

I appreciate for your support.

Clock & timing forum