This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Problem with USB driver for the LMK3000c Evaluation Board

Other Parts Discussed in Thread: LMK03000CEVAL, LMK04828, LMK03000

Hi,

I use a Board USB Interface LMK/LMX (Ref : USB2WIRE-INTERFACE) for configure a LMK03000C Evaluation Board 5ref : LMK03000CEVAL/NOPB).

I got the Code Loader 4 setup file (at this URL: http://www.ti.com/tool/codeloader ) and I have the driver file: USBdriver


My problem is, when I work with a PC Window 7-32 bit, the module uWire USB Interface Board found the driver but with a PC Window 7-64 bits, he does not find it.

Did you have this problem?

 

Thank you for your reply

 

Best regards

 

Eric

  • Hello,

    Please refer to Appendix F of the LMK04828 eval board instructions (SNAU145) for some details on using the USB2UWIRE-IFACE under windows 7. 

    The LMK03000 eval board instructions have not been updated with this section.

    73,

    Timothy