• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 21 subscribers
  • Views 1014 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Displayport 1.2 Spread-Spectrum

Tim Falls
Prodigy 20 points
Other Parts Discussed in Thread: SN75DP130

I would like know if your SN75DP130 Displayport Re-Driver device could be used to de-spread the spread-spectrum on a sink DP1.2 design (at 1.62, 2.7, and 5.4 Gbps). My design uses a Xilinx Kintex 7 FPGA, and the Rx Transceivers do not tolerate Displayport downspread. If not, do you have another part that does this?