• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 21 subscribers
  • Views 300 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CDCE62002 Start-up time

cafain
Mastermind 6755 points
Other Parts Discussed in Thread: CDCE62002

Hi.

Time of "tpul","tpuh","trsu" was shown in CDCE62002 DataSheet(SCAS882D) page36 Figure30 has not been specified.  

Please tell them of time.

Best regards

  • 0
    TI__Genius 10320 points
    Hi Cafain,

    Here tpul and tpuh are system dependent, so these are defined by your supply ramp rate. trsu is the estimated start up time of the reference (800 us worst case if using AUX_IN), so this may also be system dependent.

    Gabe