Reference Guide to make PCB : CDCE72010

Takumi Suzuki1

Other Parts Discussed in Thread: CDCE72010

Hi,

Do you have any materials like "reference Guide" to make PCB for CDCE72010?

That is to say, I would like to know the conditions to keep mind to design clock circuits (signal patternning, grounding, parts elements, etc), for example in case of using CDCE72010.

If you know, please let me know.

Best Regards,

over 10 years ago

0 Ahmed Noeman over 10 years ago

TI__Expert 3520 points

Hello Takumi,

For general detailed guidelines of high speed board design, please check this TI Tranining or this application note.

If you just need a quick guidelines for clock placement and routing, you can check the layout guideline section of any of those devices: LMK04828 , CDCM6208 , or CDCE62005. Please observe the landing pattern and other layout recommendations found in the mechanical section of the CDCE72010 datasheet.

Kind Regards,

Ahmed

0 Takumi Suzuki1 over 10 years ago in reply to Ahmed Noeman

Mastermind 8660 points

Hi Ahmed-san,

Thank you for your reply.

Let me study the documents you recommended.

Best Regards,

Clock & timing

Clock & timing forum

Reference Guide to make PCB : CDCE72010