• State Resolved
  • Locked Locked
  • Replies 4 replies
  • Answers 1 answer
  • Subscribers 20 subscribers
  • Views 4668 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CDCE62005 LVCMOS TERMINATION PROBLEM

Rolan Tang
Prodigy 100 points
Other Parts Discussed in Thread: CDCE62005

THE Application Report   SCAA096 tell us when the ref input  and output is LVCMOS, a 1K pull up resistor and  1K Pull down resistor are used, I wonder if they are  really needed? I think series resistor is more improtant.

  • 0
    Genius 4530 points

    Hi Rolan,

    Termination resistors are of 2 types - series termination and parallel termination.

    You can use series termination too (I have used it successfully in one of my projects).

    But the circuit suggested in AN is not a combination of pull-up and pull-down, it is a parallel termination circuit whose equivalent circuit  corresponds to resistance equivalent to that in case of series termination. (Although, I am not sure about the value variation, probably 100E would be better)

    Hope this helps.

    Regards,

    Sid

  • 0 in reply to Sid
    Prodigy 100 points

    Sid, you mean you use series resistance  successfully with cdce62005 LVCMOS INPUT/OUTPUT?

     

    T&R,

     

    Rolan 

  • 0 in reply to Rolan Tang
    Genius 4530 points

    Yes Rolan,

    I have used series termination successfully on bot LVCMOS input & output.

    Havent faced any problems till now :)

    Regards,

    Sid

  • 0 in reply to Sid
    Prodigy 100 points

    Thanks a lot! Rolan