LMK03318-Register Block Write and Read

Changhee Lee67

Prodigy 70 points

Other Parts Discussed in Thread: LMK03318

I am going to control LMK03318 by "Register Block Write" after POR in register default mode

so i am checking register map and i have some questions as below.

there is no data about R71, R106~R116, R121~R132, R169~R198 in the register map in it's datasheets.

Please let me know whether those registers are omitted or not when register block write or read ?

and one more question,

what is the base address of registers ,EEPROM, SRAM ?

over 9 years ago

0 Alan O over 9 years ago

TI__Mastermind 32575 points

Yes, omit writing to those registers, which are internal reserved registers.

Alan

0 Alan O over 9 years ago

TI__Mastermind 32575 points

SRAM data bytes #0-344 can be read by setting the MEMADR register to 0x00 and doing a 345-byte block read from RAMDAT register. MEMADR pointer is auto-incremented.

Similarly, EEPROM data bytes #0-344 can be read by setting the MEMADR register to 0x00 and doing a 345-byte block read from NVMDAT register. MEMADR pointer is auto-incremented.

Alan

Clock & timing

Clock & timing forum

LMK03318-Register Block Write and Read