• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 23 subscribers
  • Views 566 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[Q] Codeloader for LMK04821

Kiyoung SON
Intellectual 515 points

Other Parts Discussed in Thread: LMK04821, CODELOADER

Dear TI-er.

I am executed codeloader for LMK04821.

The "Read" button isn't existing from scratch.

I am down to scroll bar of the right side. and then The "Read" button is appearing the right side.

But, The "Read" button isn't executing.

plz help me.

  • 0
    TI__Mastermind 28590 points
    I recommend not using the read button.

    To confirm programming, please try toggling the POWERDOWN bit and observe a change in current on the Bits/Pins tab or change the polarity of the PLL1 LD (or PLL2 LD) pin on the "Other" tab by changing the type from Output (push-pull) to Output Inverted (push-pull)

    73,
    Timothy