• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 21 subscribers
  • Views 323 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CDCLVP111 / unused output pins

Toshiyuki
Mastermind 7075 points
Other Parts Discussed in Thread: CDCLVP111

Hi,

I'm considering CDCLVP111. Please let me know how to deal with unused output pins(Q*,Q_N*).

Best Regards,

Kato

  • 0
    TI__Expert 4415 points

    Hi Toshiyuki,

    When an output pin is not used, leaving it open is recommended to reduce power consumption. If only one of the output pins from a differential pair is used, the other output pin must be identically terminated to 50 ohms.

    Regards,

    -Tim