LMX2592 COTS board

Michael Robertson52

Other Parts Discussed in Thread: LMX2592EVM, LMX2592

Hi, I've been trialing a LMX2592EVM and I'm quite happy with its performance, just wondering if anyone knows of a commercial version of it which can be used for system integration, it would need to have things like non-volatile memory etc.

over 9 years ago

0 Julian Di Matteo over 9 years ago

TI__Expert 4085 points

Hi Michael,

Thanks for your interest in our products and I'm glad you are happy with the LMX2592 performance.
At this time we do not offer this device with non-volatile memory.
You would need to re-program the device every time power is applied to it. We suggest you use a low-cost MCU to program this device via SPI.

Regards,
Julian

0 Michael Robertson52 over 9 years ago in reply to Julian Di Matteo

Prodigy 180 points

Thanks, do you know of any other manufacturer who provide a standalone synth board using this chip?
Also is there a programmers manual, I look at the data sheet for the actual chip and it didn't have much.

0 Julian Di Matteo over 9 years ago in reply to Michael Robertson52

TI__Expert 4085 points

Michael,

I'm not aware of any manufacturer providing a standalone solution. We do not have a programmers manual.
Have you used TICS Pro? Our GUI to program the LMX2592 EVM.

You can export the register values (for your desired configuration) you need to write to the device via SPI.

Thanks,
Julian

Clock & timing

Clock & timing forum

LMX2592 COTS board