• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 21 subscribers
  • Views 565 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMX2492EVM: Working with a pHEMT FET

Isaac Fenta
Intellectual 480 points
Part Number: LMX2492EVM
Other Parts Discussed in Thread: LMX2492

Hi all,

I posted on this forum before on the evaluation board (https://e2e.ti.com/support/clocks/f/48/p/626450/2318015#2318015

(https://www.digikey.com/product-detail/en/cel/CE3512K2/CE3512K2-ND/6165442) will work with it? Im thinking of connecting the gate to the LMX2492, and connecting the source and drain to a power source. Let me know. Thanks!

  • 0
    Intellectual 480 points
    Sorry, for some reason my whole post didnt come out. Here is the whole post I wrote:

    I posted on this forum before on the evaluation board (e2e.ti.com/.../2318015 and looking in a different direction now. Before I asked if I could connect an antenna directly to the eval board, but now I am thinking of connecting a pHEMT FET to it instead. I was told to put an amplifier to the eval board before the antenna, so this could be used as an amplifier in a way. Do you know if this pHEMT FET (www.digikey.com/.../6165442) will work with it? Im thinking of connecting the gate to the LMX2492, and connecting the source and drain to a power source. Let me know. Thanks!
  • 0 in reply to Isaac Fenta
    TI__Expert 8505 points
    Hi Isaac,

    I see your original post is still active, looks like a good conversation you have going with Noel, I'll fix up your last post there so can continue on the complete thread there.