• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 21 subscribers
  • Views 593 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMK04828: Single-ended clock outputs

Mike Carlos
Prodigy 180 points
Part Number: LMK04828


Hi,

Is it possible to get single ended outputs from LMK04828 without using a transformer, opamp...etc.

E.g. Is it possible to use such a circuit to get single-ended output from SE_OUT port?

Thanks

  • 0
    TI__Expert 8865 points
    Hi Mike,
    I would recommend to use the IBIS model to do the simulations. In theory, you can get use one of the differential output terminal as single ended output. I would recommend to configure the output for HSDS with 50 ohm terminations on both outputs.
    Best regards
    Puneet