LMK03328: Register programming procedure : Which register are allowed to write ?

Kawai

Guru 19775 points

Part Number: LMK03328
Other Parts Discussed in Thread: CODELOADER

Hi Team,

After designing using CodeLoader4, register information can be seen in the Register Tab and dump all the data.

[Question]
Can we write all the data which is shown in the dumped text file from R0 to R173 ?

- I am wondering if we can over write the Read-Only bits or Reserved bits.
- Only access to the registers shown in the dumped data.

If any limitation, please let us know.

Best Regards,

Kawai

over 7 years ago

0 Patrick Kammermayer over 7 years ago

TI__Expert 5325 points

Hello Kawai-san,
all data you find in the codeloader or TICS Pro file can be written to the device. You can omit read only registers, when you want to save transfer time.
Codeloader and TICS Pro will put the recommended values for reserved bits.

Best regards,
Patrick

0 Kawai over 7 years ago in reply to Patrick Kammermayer

Guru 19775 points

Hi Patrick-san,

Thanks for your information.

So, when programming from CPU or FPGA, I will tell customer to write all the data from R0 to R173, which is shown in the Registers tab or Register exported text file.

Best Regards,
Kawai

Clock & timing

Clock & timing forum

LMK03328: Register programming procedure : Which register are allowed to write ?