LMX2594EVM: Reference PRO

BinLin Wang

Part Number: LMX2594EVM
Other Parts Discussed in Thread: USB2ANY

Dear TI:

Reference Pro don't connenct with computer ,check GUI of TICS Pro tools,GUI display "USB discennected' ,pleasse help.By the way,cables and lmx2594EVM connected ok.

thanks!

Wang binlin

over 8 years ago

0 Noel Fung over 8 years ago

TI__Guru** 118430 points

hi Binlin,

Can you try this?
1. connect Ref PRO to a PC
2. make sure USB driver is installed proerly
3. open TICS Pro
4. Does TICS Pro request for a firmware update?
5. if so, please following the pop-up instruction to update firmware
6. Then go to "USB communications" --> Interface
7. Make sure you have selected USB2ANY in the "Interface" box.
8. Click the "Identify" button
9. "USB Connected" should turn green

0 Noel Fung over 8 years ago in reply to Noel Fung

TI__Guru** 118430 points

Hi Binlin,

Is there any update from your side?

Clock & timing

Clock & timing forum

LMX2594EVM: Reference PRO