TPL5100: I need 24 hour max inverval timer

Yogesh Chaudhary

Intellectual 400 points

Part Number: TPL5100
Other Parts Discussed in Thread: MSP430F5529

hi,

I need 24 hour max interval timer for a low power IoT device and nanoamp current consumption.

Please suggest me part number.

over 7 years ago

0 Patrick Kammermayer over 7 years ago

TI__Expert 5325 points

Hello Yogesh,
our current portfolio in your target power range supports up to two hours intervall.

Best regards,
Patrick

0 Patrick Kammermayer over 7 years ago in reply to Patrick Kammermayer

TI__Expert 5325 points

Hello Yogesh,
moved your new question to the appropriate MSP430 forum.
Closing the thread here.
Best regards,
Patrick

0 Yogesh Chaudhary over 7 years ago in reply to Patrick Kammermayer

Intellectual 400 points

I am new with MSP430F5529 and FR5969so, I want to configure my clocks and i watched many tutorials of f5529 it's too complicated because of its orthogonal property.

I have some questions please help me i need to configure my clock for LOW power device a sensor which upload data to server once in a day so most of the time MCU remains in sleep mode( LP4 mode).

My peripheral:

GSM module (UART)
Some GPIO for controlling Hardware
A ultrasonic AFE Chip (UART)
MCU RTC Alarm for wakeup once in 24 hours or Everyday.
which clock is best for this application and how to configure RTC Alarm in FR 5969.

Thanks in Advance Sir :)

0 Patrick Kammermayer over 7 years ago in reply to Yogesh Chaudhary

TI__Expert 5325 points

Hello Yogesh,
sorry, I'm no expert on MSP430 - this is the clocking forum. For the optimal setup for MSP430 please continue the discussion with the experts in the split thread I created for you in the MSP430 forum.

Best regards,
Patrick

Clock & timing

Clock & timing forum

TPL5100: I need 24 hour max inverval timer