• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 20 subscribers
  • Views 292 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

LMX2595EVM: How to phase lock three LMX2595 evaluation boards in order to get three coherent signals

LMX2595EVM: How to phase lock three LMX2595 evaluation boards in order to get three coherent signals

Charles Nguyen
Prodigy 20 points
Part Number: LMX2595EVM
Other Parts Discussed in Thread: LMX2595

Dean,

As I try to implement this from you answers, how do I set up the SYNC mode in the LMX2595 GUI?

Thanks,

Charles

  • 0
    TI__Mastermind 28001 points
    Charles,

    Click the VCO_PHASE_SYNC button and the GUI will give you guidance how to do this.
    WHen it changes the colors, be sure to mouse over and see the tooltop.

    Also, when you check VCO_PHASE_SYNC, it tells you what category of phase sync you are in.

    Regards,
    Dean