• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 21 subscribers
  • Views 458 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CDCLVC1104EVM: Optimal Pull-Up / Pull-Down R Values for EVM

Matt Moody
Prodigy 40 points
Part Number: CDCLVC1104EVM
Other Parts Discussed in Thread: CDCLVC1104

Using a 3.3V power supply, with a pulse input voltage of approx. 3.3V - what is the optimal pull-up/pull-down resistor values for maximum voltage (3.3V) at the SMA output ports?

  • 0
    TI__Mastermind 32575 points
    CDCLVC1104 has a LVCMOS (push-pull) output driver that does not require pull-up or pull-down resistors. When driving a high-impedance or parastiic capacitance, it can swing rail-to-rail (VCC-to-GND).

    See Figure 5 for the recommended output series resistor value (source termination) used for trace impedance matching for a 50-ohm trace.

    Alan