• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 20 subscribers
  • Views 406 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPL5110: TPL5110

Hatem Tawfik54
Prodigy 40 points
Part Number: TPL5110

I was wondering can  i program the device for one cycle 100 ms long starting at a certain time, so for example I would like it to switch  on at 3 p.m. and only for 100 ms?

  • 0
    TI__Genius 16845 points
    Set R_ext to 500 ohms to set the time interval to 100ms, and tie EN/ONE_SHOT low to configure TPL5110 as a one-shot. Use the DELAY/M_DRV pin to switch it on.

    Be aware that t_M_DRV and t_DB can affect t_DRV. See datasheet figure 12 for a visual aide.

    Kind regards,
    Lane