• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 21 subscribers
  • Views 553 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS570 counter delay programming

Poornima Mijar
Prodigy 10 points
Other Parts Discussed in Thread: TMS570LS3137

Can i Use two compare values for a single counter block in rti in tms570ls3137 simultaneously to generate dfferent delays

  • 0
    TI__Mastermind 21425 points
    Hello,
    There are four compare registers (RTICOMPy) to generate interrupt requests to the VIM or DMA requests to the DMA controller. The interrupts can be used to generate different timebases for the operating system. Each of the compare registers can be configured to be compared to either RTIFRC0 or RTIFRC1. When the counter value matches the compare value, an interrupt is generated.



    Best regards,
    Miro