LMK04832: Any MSP430 register programming examples?

Wade Vonbergen

Part Number: LMK04832
Other Parts Discussed in Thread: MSP430F2013, , CDCM6208

I have customer looking to jump start a development using the LMK04832. Initial thought is a MSP430F2013 to perform the initial power up register configuration.

Are you aware of any MSP430F2013 or other MSP430 or MCU source code that implements something like this?

Thanks,

Wade

over 6 years ago

0 Lane Boyd over 6 years ago

TI__Genius 16845 points

Hi Wade,

You can use the TICS Pro GUI software to generate the register configuration: http://www.ti.com/tool/TICSPRO-SW

Kind regards,
Lane

0 Wade Vonbergen over 6 years ago in reply to Lane Boyd

TI__Guru 62930 points

Not really concerned with generating values to be programmed, but the hardware/software solution to load them via spi ideally with an MSP430 MCU.

I did not expect there to be sample MCU source code, but needed to ask.

Can you confirm that you do not have source code example of MCU loading registers?

Thanks,

Wade

0 Timothy T over 6 years ago in reply to Wade Vonbergen

TI__Mastermind 28550 points

The CDCM6208 has an MSP430 example for programming SPI into the CDCM6208. This could be adapted for the LMK04832.

See www.ti.com/.../slac541
This is from the CDCM6208 product folder.

73,
Timothy

0 Wade Vonbergen over 6 years ago in reply to Timothy T

TI__Guru 62930 points

This may be marginally helpful. The processor used does not have SPI capability, so it is simply bit-banged.

The processor that customer is considering has USI (spi) capability.

Thanks for the feedback.

Regards,

Wade

Clock & timing

Clock & timing forum

LMK04832: Any MSP430 register programming examples?