• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 21 subscribers
  • Views 264 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMX2594: Absolute rating on digital interface pin

Taketo Sato
Genius 10325 points
Part Number: LMX2594

Hello team,

I have a question about absolute maximum rating of LMX2594 digital interface pins.

There is no such information in datasheet, so could you please let me know the information in terms of voltage rating and current rating?

Best regards,

  • 0
    TI__Genius 12705 points

    Hello,

    Please limit the ABS Max voltage on I/Os to less than Vcc + 0.3V.

    There is no max current typically provided beyond the electrical characteristics as the I/O's are ESD protected.

    Regards,

  • 0 in reply to Liam Keese
    TI__Genius 10325 points

    Hello Liam-san,

    Thank you for the comment.

    Could you please let me know a mechanism of damage caused by the voltage exceeding? I would like to understand correctly this because there is no absolute rating table on the datasheet for the digital pin.

    I think there are diodes on the pins for ESD structure. Can I think Vcc+0.3V requirement is for the diode to be avoided much current flow when exceeding the voltage? If so, could you please let me know its recommended forward current?

    Best regards,

  • 0 in reply to Taketo Sato
    TI__Genius 12705 points

    Hello,

    Yes, this is to prevent turning on ESD structures and avoid biasing up the device through non-supply pin.

    We don't typically provide abs max values on current for digital pins, only voltage.

    Regards,