CDCE62002: CDCE62002 AUX_IN

Eric Shen42

Part Number: CDCE62002

Dear TI Team：
Does the AUX_IN of CDCE62002 has amplitude requirement?

The amplitude of crystal oscillator from different manufacturers is different, my customer want to check the amplitude requirement.

Thanks!

Regards!

Eric Shen

over 6 years ago

0 Derek Payne over 6 years ago

TI__Mastermind 33860 points

Hi Eric,

Crystal input ESR is specified as 50Ω, and drive level is (for some reason) located in datasheet timing characteristics and specified as 0.1mW (-10dBm) minimum. So RMS volts drive level should be higher than 70.7mV minimum.

Regards,

0 Eric Shen42 over 6 years ago in reply to Derek Payne

Expert 2750 points

Hi Derek:
Thanks!

Clock & timing

Clock & timing forum

CDCE62002: CDCE62002 AUX_IN