• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 21 subscribers
  • Views 390 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CDCM61001 Chip Enable versus Reset...

Jeffrey McCasland
Prodigy 140 points
Other Parts Discussed in Thread: CDCM61001

Do I need to assert/deassert the RST pin after deasserting Chip Enable?  i.e. does the CDCM61001 device execute an internal PLL calibration upon deassertion of Chip Enable?

 

Thanks

 

Jeffrey McCasland