CDCE6214-Q1: I2C Programming details

Akshay Patel1

Intellectual 690 points

Part Number: CDCE6214-Q1

Hi team,

I am using CDCE6214-Q1 for clock generation. I checked datasheet at http://www.ti.com/lit/ds/symlink/cdce6214-q1.pdf

Programming details (I2C) are not mentioned. Please provide details.

Thanks,

Akshay

over 6 years ago

0 Hao Z over 6 years ago

TI__Mastermind 18070 points

Hello Akshay,

We separated register information from datasheet. It's in this manual: http://www.ti.com/lit/ug/snau247/snau247.pdf

Regards,
Hao

0 Akshay Patel1 over 6 years ago in reply to Hao Z

Intellectual 690 points

Hi Hao,

I found register details, but I want to know I2C sequence for read or write operation. By sequence I mean, sequence of sending slave address, register address, data etc and response expected from device.

Regards,

Akshay

0 Hao Z over 6 years ago in reply to Akshay Patel1

TI__Mastermind 18070 points

Hi Akshay,

The I2C read/write sequence is based on industry standard and we don't always include that in datasheet. Please refer to this appnote for details: http://www.ti.com/lit/an/slva704/slva704.pdf

Regards,
Hao

0 Akshay Patel1 over 6 years ago in reply to Hao Z

Intellectual 690 points

Hi Hao,

Thanks for the confirmation.

I asked for I2C sequence, as there are minor differences in sequence (sequence is not changed but some parameter are added in sequence) with different manufacturer's.

Regards,

Akshay

Clock & timing

Clock & timing forum

CDCE6214-Q1: I2C Programming details