LMK04828: VCO Frequency Noise Emission

Kazuki Itoh

Part Number: LMK04828

Hi team,

My customer working on WI product is concerned that LMK04828 emits unacceptable level of noise at VCO frequency, so they need to deal with it with Noise Suppressing / Magnetic Sheet.

Do you have any solution to suppress the noise without the sheet?

Regards,

Itoh

over 6 years ago

0 Dean Banerjee over 6 years ago

TI__Mastermind 28031 points

Kazuki,

Not that I know of. You might find that if you change the output format, perhaps to LVDS, then this can reduce the noise.

Regards,

Dean

0 Kazuki Itoh over 6 years ago in reply to Dean Banerjee

TI__Genius 11320 points

Hi Dean-san,

Could you please make sure the problem with EVM? Can it be solved with more realistic ways? Format change is not going to solve my customer’s problem.

Regards,

Itoh

0 Shawn Han over 6 years ago in reply to Kazuki Itoh

TI__Genius 9920 points

How many dB violation in this EMI test?

If output format change didn't get any improvement, there is no register setting can help the EMI issue on VCO frequency.

But a shielding box can help.

0 Kazuki Itoh over 6 years ago in reply to Shawn Han

TI__Genius 11320 points

Hi team,

My customer already uses LVDS output format because it consumes less current. I'd really appreciate if there's any other solution aside from shield box. If not, I will close this thread.

Regards,

Itoh

0 Shawn Han over 6 years ago in reply to Kazuki Itoh

TI__Genius 9920 points

Not only shield box, power supply filter also have to consider how to isolation such VCO frequency for those sensitive circuits.

Thanks for your questions before your close the thread.

0 Kazuki Itoh over 6 years ago in reply to Shawn Han

TI__Genius 11320 points

Hi Shawn-san,

OK. Thank you for your help.

Regards,

Itoh

Clock & timing

Clock & timing forum

LMK04828: VCO Frequency Noise Emission