PLLATINUMSIM-SW: Lock Time Analysis Parameters

Drew Nakamura

Hi there,

I noticed that Fout and VCO core selection in the loop diagram (upper left of software window) impact the settling time. Should I set these according to what the start frequency or the final frequency is?

Thanks,

Drew

over 6 years ago

0 Dean Banerjee over 6 years ago

TI__Mastermind 28031 points

Drew,

These should be set according to the final frequency. It is the final VCO gain and calibration of the final core that will dominate the lock time.

Regards,
Dean

Clock & timing

Clock & timing forum

PLLATINUMSIM-SW: Lock Time Analysis Parameters