CDCS504-Q1: Output Stability Time

Hello, 

So you're essentially asking for start up time, correct? 

The datasheet doesn't have this information. Let me search internal documents to see if I can provide any recommendations. 

Thanks and regards,

Amin 

Hi Amin-san,

How is this situation?

Best Regards,

Kuramochi

Hi Kuramochi-san, 

I haven't found anything yet.. do you have a ballpark number that you're looking for? Is there a limit were the part would be useful or not? 

Thanks and regards,

Amin 

Amin-san,

Thank you for your help.

My customer requires a shorter time.

How is 1ms?

Best Regards,

Kuramochi

Hi Kuramochi-san, 

I currently don't have any units/boards to test this on and none of the documentation I can find has any input on this. Do they have anything on their end to test this on? one unit should give a ball park number and at least order of magnitude. 

Thanks and regards,

Amin

Hi Amin-san,

My customer measured stability time on their board., it was about 100us

How long should we wait as stability time? 

Best Regards,

Kuramochi

Hi Kuramochi-san, 

I meant they can measure how long it takes the output to come up, the specific thing they're looking for. Do they not have capability to make this measurement? 

Thanks and regards,

Amin 

Hi Amin-san,

>Do they not have capability to make this measurement? 

My customer measured stability time on their board., it was about 100us

Is it not satisfied with this?

Best Regards,

Kuramochi

Understood. There isn't anything else we could do with it, that is the actual time for the device. 

Amin