Other Parts Discussed in Thread: CLOCKPRO
hi ti team
How to config CDCE913 register to work with DS90UB941AS?
For example my video timing is 4096*781*60 and using 27M External Crystal.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello,
I understand that you are planning to use the CDCE913 with a 27 MHz crystal.
Can you elaborate a bit more about what you are looking for? Are you asking for a CDCE913 configuration for a clock rate associated with your video timing? Can you advise the clock rate you this video mode requires?
73,
Timothy
Hello,
Please allow me to check with our internal team about this as this is a multiple business unit question. Expect a quick response!
hi ti team
thanks for you reply.
Now we want to configure CDCE913 to output 191938560 hz as pclk for 941(as external clk). could you please tell use how to configure it?
hi Aaron
thanks for your reply.
I think the way we configure CDCE913 are same, but the video out is shaking in a very small amplitude. could you please share your Bits Viewer to me ?