TI Clock Pro and CDCE906 CDCE706

Alphan Karacaer56

Other Parts Discussed in Thread: CDCE906, CLOCKPRO

In the TI Clock Pro product page, it is written that TI Clock Pro is compatible with CDCE906 but I cant find that option, also when I try to download Ti Clock Pro from TI Website, I get some other program NI Measurement & Automation.

If anybody has the hex file for CDCE906, can he please send to me. I will be very grateful.

Alphan

over 14 years ago

0 Julian Hagedorn over 14 years ago

TI__Mastermind 20900 points

Alphan,

did you try to download the "executable file without Labview...." from the CDCE906 product page?

Here is the link once again, where you will get an executable program. This will contain the option to program the CDCE906. Just execute "TI clockPro.exe" and select CDCE906/E706.

Best regards,

julian

0 Vania Cecchi1 over 11 years ago in reply to Julian Hagedorn

Prodigy 10 points

but it is not possible to use it without labview, isn't it?

0 Patrick Kammermayer over 11 years ago in reply to Vania Cecchi1

TI__Expert 5325 points

Hello Vania,

the CDCE906/706 performance EVM uses a parallel port and can only be used with the software linked by Julian. The programming EVM can be used with the ClockPro software.

Best regards,

Patrick

Clock & timing

Clock & timing forum

TI Clock Pro and CDCE906 CDCE706